[Проблема] Вылетает синий экран

Тема в разделе "Windows", создана пользователем Gutman, 5 апр 2016.

  1. G

    Gutman Зарегистрированный

    Сообщения:
    2
    Вылетает синий экран при запуске Frost'a, грешил на оперативу, но поставил другую плашку, проблема осталась, может кто разберается в дампах, подскажите в чем проблема. Анализ дампа ниже


    Crash Dump Analysis provided by OSR Open Systems Resources, Inc. ([ссылка])
    Online Crash Dump Analysis Service
    See [ссылка] for more information
    Windows XP Kernel Version 2600 (Service Pack 3) UP Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 2600.xpsp_sp3_qfe.130503-0418
    Machine Name:
    Kernel base = 0x804d7000 PsLoadedModuleList = 0x805541c0
    Debug session time: Sat Apr 2 07:44:37.154 2016 (UTC - 4:00)
    System Uptime: 0 days 0:02:35.976
    *******************************************************************************
    * *
    * Bugcheck Analysis *
    * *
    *******************************************************************************

    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced. This cannot be protected by try-except,
    it must be protected by a Probe. Typically the address is just plain bad or it
    is pointing at freed memory.
    Arguments:
    Arg1: f79ad000, memory referenced.
    Arg2: 00000000, value 0 = read operation, 1 = write operation.
    Arg3: b72bcfe7, If non-zero, the instruction address which referenced the bad memory
    address.
    Arg4: 00000000, (reserved)

    Debugging Details:
    ------------------


    Could not read faulting driver name
    TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

    READ_ADDRESS: GetUlongFromAddress: unable to read from 805589f0
    f79ad000

    FAULTING_IP:
    frost+1fe7
    b72bcfe7 8a02 mov al,byte ptr [edx]

    MM_INTERNAL_CODE: 0

    DEFAULT_BUCKET_ID: DRIVER_FAULT

    BUGCHECK_STR: 0x50

    PROCESS_NAME: L2.exe

    LAST_CONTROL_TRANSFER: from b72bca8a to b72bcfe7

    STACK_TEXT:
    WARNING: Stack unwind information not available. Following frames may be wrong.
    b7690b4c b72bca8a f79acfff b72c4b4a b72c4b3a frost+0x1fe7
    b7690b68 b72bd18b f79ab000 00002000 b72c4b4a frost+0x1a8a
    b7690bbc b72bcbc9 00000008 4fd93000 b7690c20 frost+0x218b
    b7690be0 805c652a 0196a650 000007bc b7690c20 frost+0x1bc9
    b7690c00 805a6ae5 8396a650 000007bc b7690c20 nt!PsCallImageNotifyRoutines+0x36
    b7690c48 805a75d2 837b0008 4fd70000 b7690d18 nt!MiMapViewOfImageSection+0x4c1
    b7690ca4 805a7997 00000004 84876c10 b7690d18 nt!MmMapViewOfSection+0x13c
    b7690d34 8053d854 00000020 ffffffff 0012f7d4 nt!NtMapViewOfSection+0x2bd
    b7690d34 7c90e514 00000020 ffffffff 0012f7d4 nt!KiSystemServicePostCall
    0012f7f0 00000000 00000000 00000000 00000000 0x7c90e514


    STACK_COMMAND: kb

    FOLLOWUP_IP:
    frost+1fe7
    b72bcfe7 8a02 mov al,byte ptr [edx]

    SYMBOL_STACK_INDEX: 0

    SYMBOL_NAME: frost+1fe7

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: frost

    IMAGE_NAME: frost.sys

    DEBUG_FLR_IMAGE_TIMESTAMP: 56ebb7d2

    FAILURE_BUCKET_ID: 0x50_frost+1fe7

    BUCKET_ID: 0x50_frost+1fe7

    Followup: MachineOwner
     

Поделиться этой страницей